Explosion-proof safety switches 10 A
Explosion-proof safety switches 10 A
The 10A safety switch is designed to switch on and/or off appliances and equipment located in the hazardous area.
The equipment and appliances are switched on or off by means of a switch located on the switch body. These devices are characterised by simple installation and easy access to the contact terminals.
The version of safety switches up to 10 A with a housing made of polyamide or glass fibre reinforced polyester provides a high degree of protection IP66.
On request, they can be fitted with moulded plastic latches or brass flanges.
Technical specifications
|
Explosion-proof safety switches 10 A |
|
|
Mark |
II 2 G Ex ed IIC T6 II 2 D Ex tD A21 IP66 T80 °C |
|
EU certificate |
PTB 00 ATEX 1074 |
|
Certificate of Conformity |
IECEx BKI 07.0014 |
|
Mark |
Ex ed IIC T6 |
|
Permissible ambient temperature |
-20°C to +40°C |
|
Nominal voltage |
max. 500 V |
|
Rated current |
max. 10 A |
|
Frequency |
50/60 Hz |
|
Rated switching on/off capacity AC-3 |
230 V Ue / Ie 10 A |
|
Input fuse |
400 V AC: 20 A gL |
|
Cable coupling/hole in the housing |
M20 (d = 5 …13 mm) see ordering data |
|
Protection class |
I |
|
Degree of protection according to EN 60529 |
IP66 |
|
Enclosure material |
impact-resistant polyamide |
|
Case colour |
black |
|
Auxiliary contact |
1 x NO switching on – lagging; switching off – advance |
|
Locking device |
can be locked in the OFF position with 3 commercially available padlocks |
|
|
|
|
Ordering data |
|
| 3-pin with cable glands 2 x M25 / 1 x M 20 | GHG 261 0005 R0009 |
| 3-pin with cable glands 2 x M20 | GHG 261 0005 R0005 |
| 3-pin emergency switch with cable glands 2 x M25 / 1 x M 20 | GHG 261 0005 R0010 |
