High voltage cabinet 4TJB 15 kV
High voltage cabinet 4TJB 15 kV
Based on the HVJB range but suitable for up to 15kV, the ABJB can accept up to 4 phase connections either directly or via the bottom input. The unit can accommodate up to three connectors per phase.
- Fault 45kA for 0.2 seconds
- DTS-01 tested enclosure
- Wide ambient temperature range
- Heavy duty mechanised hinges with retractable lid
| Product type | 4TJB(x-x) |
| Width (mm) | 1300 |
| Height (mm) | 1,500 to 2,000 |
| Depth (mm) | 500 |
| Power level (W) | 346 |
| Max. voltage (kV) | 45 |
| Max. Current (A) | 980 |
| External temperature | -20℃ to + 40℃ |
| Weight (kg) | 290 |
| Product type | 4TJB(x-x) |
| Width (mm) | 1300 |
| Height (mm) | 1,500 to 2,000 |
| Depth (mm) | 500 |
| Power level (W) | 288 |
| Max. voltage (kV) | |
| Max. Current (A) | 980 |
| External temperature | -20℃ to + 40℃ |
| Weight (kg) | 290 |
* (x-x) indicates the number of connectors per phase, 1st position = top, 2nd position = bottom. For example: 4TJB (1-1) = 1 x conductors per phase top input and 1 x conductor per phase inlet.
| Enclosure type | High-voltage |
| IP protection | IP66 |
| Shock resistance | >7Нм |
| Material | Stainless steel (EN 1.4404) |
| Maximum outputs | 1 for incoming phase and 1 for outgoing phase |
| Number of cable entries | Depending on the configuration |
| Crimping lugs | 6mm2 до 1000mm2 |
| Earthing | Through the studs on the housing |
| Mounting | Through corner frames 3 mm thick |
| Certification | |
| Zone Classification | Zone 1 & 21, Gas and dust |
| Hardware encoding | II 2 GD T4 Gb, Ex tb IIIC T135℃ Db |
| Certificate number | CML 14ATEX3025X |
* Represents the standard configuration. Other termination agreements may be available, please contact seller for more information
Product design and specifications are subject to change without notice; please check the website for the latest specifications
Options
| ACH | Anti-condensation heater |
| EP | Polished |
| PS | Epoxy coating, smooth finish |
| PT | Epoxy coating |
| MB | Mounting rod for bolts |
Add the required suffix to the product reference.
Example: 4TJB (1-1) PT = 4TJB with 1 x phase inlet conductors and 1 x phase inlet conductor with Hammer Grey paint finish
| ABDM2010SS | M20 Airway drainage |
| ABDM2510SS | M25 Airway drainage |
| FBM12EEMS *** | M12 Lifting bolts |
| FBM16EEMS *** | M16 Lifting bolts |
*** Stainless steel lifting bolts are also available, contact them for information
