Heating panel for SPX-C tanks
Heating panel for SPX-C tanks
SPX-C heating mats are used to prevent freezing or maintain temperatures in chemical, waste water and product containers.
SPX-C heater panels are specifically designed to prevent freezing or maintain temperatures in chemical, wastewater and product containers of temperature sensitive plastics, FRP and metal tanks, bins, trays and other structures.
SPX-C heater panels are customised with sizes and wattages available for each unique application. SPX-C can be designed with ultra-low power density for freeze protection on extremely heat-sensitive composites and is also available with watt densities up to 0.60 watts per square inch for maximum holding temperatures up to 82 °C.
The overall design of the SPX-C heating panel is completely waterproof. Each SPX-C heater is supplied with factory set wattage complete with cold leads of the ordered length to suit your requirements.
Technical specifications
|
Heating mat power |
775 W/sq.m. |
|
Max. prolonged exposure to temperature |
104°C |
|
Max. peak temperature impact |
140°C |
|
Min. installation temperature |
10°C |
|
Min. bending radius |
318 mm |
|
Min. vessel diameter |
762 мм |
|
Power supply system parameters |
220…240 V |
|
Heating elements |
Multichannel parallel circuit |
|
Grounding braid |
Aluminium braid with a thickness of 0.005 mm |
|
Cold ends |
3-16 AWG cable with TPE insulation |
|
Length of cold ends |
Standard length: SPX-C 210 – 3 m 420 SPX-С – 3 m 210-16 SPX-С – 4,87 m 420-16 SPX-С – 4,87 m |
|
Temperature class |
Т3 |
The versatility of the SPX-C heater design allows us to offer panel sizes from 100mm x 300mm to 457mm x 2400mm with power densities up to 775 watts per square metre.
