Explosion-proof linear luminaire ZFL
Explosion-proof linear luminaire ZFL
Explosion-proof linear luminaires of ZFL series are designed for illumination of industrial premises, open areas in oil, gas, chemical, cement, woodworking, metallurgical, pharmaceutical and other areas where the presence of explosive atmospheres is possible.
ZFL explosion-proof luminaires can also be equipped with an uninterruptible power supply (UPS) built into the luminaire housing. The operating time in emergency mode is 180min.
This series of luminaires is designed for installation in explosion hazardous areas of class 2, 22 and fire hazardous areas of classes P-I, P-II. It is also permissible to use it in class 21 zone in compliance with the requirements of NPAOP 40.1.1.32-01 “Electrical equipment of special installations”, “Technical Regulations of equipment and protective systems designed for use in potentially vibuhoneproof environment” and other normative documents.
|
CODE |
LAMP TYPE |
TEMPERATURE CLASS |
EMERGENCY BLOCK |
AUTONOMY |
DRAWING |
|
|
GAS |
DUST |
|||||
|
LIGHTS FOR ONE OR TWO LUMINEScent lamps – 110-240V AC 50/60Hz power supply |
||||||
|
ZFL-118 |
1 x 18 W |
T6 (AT = 40°C) |
T85°C |
– |
– |
А |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
ZFL-136 |
1 x 36 W |
T6 (AT = 40°C) |
T85°C |
– |
– |
А |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
ZFL-218 |
2 х 18 W |
T6 (AT = 40°C) |
T85°C |
– |
– |
A |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
ZFL-236 |
2 х 36 W |
T6 (AT = 40°C) |
T85°C |
– |
– |
A |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
LIGHTS FOR ONE OR TWO LUMINESCENT LAMPS WITH EMERGENCY POWER SUPPLY – 220/240V AC 50/60Hz POWER SUPPLY |
||||||
|
ZFLE-118 |
1 x 18 W |
T6 (AT = 40°C) |
T85°C |
4.8 V – 4Ah |
180 мин. |
A |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
ZFLE-136 |
1 x 36 W |
T6 (AT = 40°C) |
T85°C |
4.8 V – 4Ah |
180 min. |
A |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
ZFLE-218 |
2 х 18 W |
T6 (AT = 40°C) |
T85°C |
4.8 V – 4Ah |
180 min. |
A |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
ZFLE-236 |
2 х 36 W |
T6 (AT = 40°C) |
T85°C |
4.8 V – 4Ah |
180 min. |
A |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
Technical specifications
|
EXECUTION |
II 3 G Ex nA IIC T6/T5/T4 Gc II 3 D Ex tc IIIC T85°C/T100°C/ T135°C Dc |
|
COMPLIANCE |
EN 60079-0; EN 60079-15; EN 60079-31 |
|
LEVEL OF PROTECTION |
IP66 |
|
OPERATING TEMPERATURE RANGE |
-20°C ÷ +60°C |
|
Mechanical characteristics |
|
|
Body |
glass fibre reinforced polyester resin, self-extinguishing in accordance with the following. UL94 |
|
diffuser |
U/V resistant polycarbonate |
|
Colour |
powder-coated, epoxy, colour grey RAL-7039 |
|
Gaskets |
EPDM 60 rubber is suitable for high temperatures and resistant to environmental conditions |
|
Cable connection |
ISO-2xM20 cable glands, ISO-2xM20 plugs |
|
Electrical characteristics |
|
|
Power supply |
two-channel electronic ballast 110÷240B AC/DC 50/60Hz (cos ρ ≥ 0.98) |
|
Cartridge |
double pin G13 |
|
Wiring |
cables with silicone insulation resistant to high temperatures |
|
Terminals |
for cable connection up to 4mm² |
Accessories on request:
- Mounting for mounting on linear support complete with stainless steel bolts;
- Ceiling mount complete with stainless steel bolts;
- Suspension mount complete with stainless steel bolts;
- Wall mount complete with stainless steel bolts;
- The voltage is different from the standard voltage;
- The connection is different from the standard connection;
- Emergency switch;
