Explosion-proof linear luminaire EVSN
Explosion-proof linear luminaire EVSN
Explosion-proof linear luminaires of EVSN series are designed for illumination of industrial premises, open areas in oil, gas, chemical, cement, woodworking, metallurgical, pharmaceutical and other areas where the presence of explosive atmospheres is possible.
EVSN explosion-proof luminaires can also be equipped with an uninterruptible power supply (UPS) built into the luminaire housing. The operating time in emergency mode is 120min.
This series of luminaires is designed for installation in explosion hazardous areas of class 2, 22 and fire hazardous areas of classes P-I, P-II. It is also permissible to use it in class 21 zone in compliance with the requirements of NPAOP 40.1.1.32-01 “Electrical equipment of special installations”, “Technical Regulations of equipment and protective systems designed for use in potentially vibuhoneproof environment” and other normative documents.
|
CODE |
LAMP TYPE |
TEMPERATURE CLASS |
EMERGENCY BLOCK |
AUTONOMY |
DRAWING |
|
|
GAS |
DUST |
|||||
|
СВІТИЛЬНИКИ ДЛЯ ОДНІЄЇ АБО ДВОХ ЛЮМІНЕСЦЕНТНИХ ЛАМП – ЖИВЛЕННЯ 110-240 АС/DC 50/60Гц |
||||||
|
EVSN118EL |
1 x 18 W |
T6 (AT = 40°C) |
T85°C |
– |
– |
А |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
EVSN136EL |
1 x 36 W |
T6 (AT = 40°C) |
T85°C |
– |
– |
А |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
EVSN158EL |
1 х 58 W |
T5 (AT = 60°C) |
T100°C |
– |
– |
A |
|
EVSN218EL |
2 х 18 W |
T6 (AT = 40°C) |
T85°C |
– |
– |
A |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
EVSN236EL |
2 х 36 W |
T6 (AT = 40°C) |
T85°C |
– |
– |
A |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
EVSN258EL |
2 х 58 W |
T5 (AT = 60°C) |
T100°C |
– |
– |
A |
|
LIGHTS FOR ONE OR TWO LUMINESCENT LAMPS WITH EMERGENCY POWER SUPPLY – 220/240V AC 50/60Hz POWER SUPPLY |
||||||
|
EVSNE118EL |
1 x 18 W |
T6 (AT = 40°C) |
T85°C |
4.8 V – 4Ah |
120 min. |
A |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
EVSNE136EL |
1 x 36 W |
T6 (AT = 40°C) |
T85°C |
4.8 V – 4Ah |
120 min. |
A |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
EVSNE158EL |
1 х 58 W |
T5 (AT = 60°C) |
T100°C |
4.8 V – 4Ah |
120 min. |
A |
|
EVSNE218EL |
2 х 18 W |
T6 (AT = 40°C) |
T85°C |
4.8 V – 4Ah |
120 min. |
A |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
EVSNE236EL |
2 х 36 W |
T6 (AT = 40°C) |
T85°C |
4.8 V – 4Ah |
120 min. |
A |
|
T5 (AT = 50°C) |
T100°C |
|||||
|
T4 (AT = 60°C) |
T135°C |
|||||
|
EVSNE258EL |
2 х 58 W |
T5 (AT = 60°C) |
T100°C |
4.8 V – 4Ah |
120 min. |
A |
Technical specifications
|
EXECUTION |
II 3 G Ex nA IIC T6/T5/T4 Gc II 3 D Ex tc IIIC T85°C/T100°C/T135°C Dc |
|
COMPLIANCE |
EN 60079-0; EN 60079-15; EN 60079-31 |
|
LEVEL OF PROTECTION |
IP65 |
|
OPERATING TEMPERATURE RANGE |
-20°C ÷ +60°C |
|
Mechanical characteristics |
|
|
Body |
glass fibre reinforced polyester resin |
|
diffuser |
U/V resistant polycarbonate |
|
Gaskets |
EPDM 60 rubber is suitable for high temperatures and resistant to environmental conditions |
|
Cable connection |
ISO-1xM20 cable gland, ISO-1xM20 blanking plug |
|
Electrical characteristics |
|
|
Power supply |
two-channel electronic ballast 110÷240B AC/DC 50/60Hz (cos ρ ≥ 0.98) |
|
Cartridge |
double pin G13 |
|
Wiring |
cables with silicone insulation resistant to high temperatures |
|
Terminals |
for cable connection up to 6mm² |
Accessories on request:
- Mounting for mounting on linear support complete with stainless steel bolts;
- Ceiling mount complete with stainless steel bolts;
- Suspension mount complete with stainless steel bolts;
- Wall mount complete with stainless steel bolts;
- The voltage is different from the standard voltage;
- Connection of up to 4 cable glands;
- Ex-de emergency switch.
