Explosion-proof LED luminaires EVAC
Explosion-proof LED luminaires EVAC
Explosion-proof LED luminaires of EVAC series are designed for illumination of industrial premises, open industrial sites, and other places where the presence of explosive atmospheres is possible. Due to the low pulsation factor, the luminaires can be used not only as general lighting, but also as lighting for the working areas of control operators and other service personnel.
Design features of EVAC LED luminaires and materials used for their manufacture allow continuous protection of LEDs from aggressive harmful substances at the customer’s facilities during the entire long service life.
|
CODE |
TEMPERATURE CLASS |
LIGHT FLOW, Lm |
POWER, W |
CONNECTING |
|
|
GAS |
DUST |
||||
|
EVAC201-32LED |
T5/T4 |
Т 85°С/ Т 105°С |
2120 |
32 |
1 x 1“ NPT |
|
EVAC201L-004 |
2 x 3/4“ NPT |
||||
|
EVAC201-48LED |
T5/T4 |
Т 85°С/ Т 105°С |
3918 |
48 |
1 x 1“ NPT |
|
EVAC201L-006 |
2 x 3/4“ NPT |
||||
|
EVAC501-64LED |
T6/T5 |
Т 95°С |
4265 |
64 |
1 x 1“ NPT |
|
EVAC501L-008 |
2 x 3/4“ NPT |
||||
|
EVAC501L-012 |
T6/T5 |
Т 95°С |
7392 |
96 |
2 x 3/4“ NPT |
|
Execution |
Ex db op is IIC T6/T5/T4 Gb Ex op is tb IIIC T85/100/135°C Db |
|
Compliance |
EN/IEC 60079-0; EN/IEC 60079-1; EN/IEC 60079-31 |
|
Protection level |
IP66 |
|
Body |
copper-free marine aluminium |
|
diffuser |
high temperature resistant impact resistant borosilicate glass |
|
Colour |
powder-coated, epoxy, grey RAL-9006 |
|
Bolts |
stainless steel |
|
Gasket |
silicone rubber |
|
Cable connection |
2 x 3/4“NPT, 1 x 1“NPT |
|
Power supply |
120-277V AC, frequency 50Hz/60Hz |
|
Lamp type |
MK-R / CREE CRI 70, CCT 5700K. 80.000 hours L80 B10 @ta25 |
|
Wiring |
cables with silicone insulation resistant to high temperatures |
|
Terminals |
for cable connection up to 4mm² |
Accessories on request:
– External epoxy coating with colour on request
– Threaded connection other than standard connection
