Thermostat for snow and anti-icing systems Terneo Sneg+OSA
Thermostat for snow and anti-icing systems Terneo Sneg+OSA
The Terneo Sneg thermostat is designed to work with anti-icing and snow melting systems. It is used in heating systems to prevent the formation of icicles on the roofs of buildings, as well as for heating sidewalks, roads, sites, ramps and steps, prevents the formation of ice. Works with temperature and precipitation sensors to control the electric heating of snow melting and drainage systems. The flexible system of weather station settings allows you to configure the heating control taking into account all the individual parameters of the heated object. The weather station is controlled using buttons. All the necessary information is displayed on the screen. The weather station is equipped with a temperature sensor and an additional precipitation sensor (terneo osa).
The Terneo Sneg regulator is configured in two ranges, measuring the ambient temperature and the presence of precipitation. When the temperature readings fall within the range specified in the regulator settings, when precipitation appears, the regulator automatically turns on the heating. After precipitation stops, the regulator maintains the shutdown delay set on it, from 20 minutes to 4 hours, and turns off the heating, the regulator also has a forced switch-on, which allows you to turn on the regulator if necessary, regardless of the indicators set on it. When forced on, the regulator will automatically turn off the heating after the delay set on it.
Technical specifications:
|
Type |
Digital for indoor DIN rail mounting |
|
Operating voltage, V |
220-240, 50-60 Hz |
| Contact (relay) | one normally open contact |
| Maximum current, A | 16 |
| Ambient temperature, °C | +5 to -20 |
|
Degree of enclosure protection |
IP20 |
|
Dimensions, mm |
52 х 90 х 67 |
|
Warranty |
3 years |
