Setting the basic parameters of the Eberle EM 524 89 controller
Setting the basic parameters of the Eberle EM 524 89 controller
|
How to set up the use of the regulator
|
1. Press the upper control knob (MENU) repeatedly to enter APPLICATION mode. The valid value of the parameter is displayed immediately 2. Use the middle key (VALUE) to select the required value for the roof (ROOF). 3. To enter and save the value we need, press the lower key ENTER
|
|
Procedure for setting the lower limit value of the electric heating trigger temperature
|
1. Press the upper control knob (MENU) several times to enter the mode for selecting the lower limit of the electric heating trigger temperature (RANGE). The valid temperature value is displayed immediately. 2. Use the middle key (VALUE) to select the desired value from -5 to -20 degrees. 3. To enter and save the value we need, press the lower key ENTER
|
|
Procedure for setting the value of the upper limit of the electric heating operating temperature
|
1. Press the upper control knob (MENU) several times to enter the mode for selecting the upper limit of the electric heating trigger temperature (TEMPERATURE). The valid temperature value is displayed immediately. 2. Use the middle key (VALUE) to select the desired value from 0 to +6 degrees. 3. Чтобы ввести и сохранить нужное нам значение, нажмите нижнюю клавишу ENTER.
|
|
Procedure for setting the humidity measurement of the precipitation sensor
|
1. Press the upper control knob (MENU) repeatedly to enter the MOISTURE selection mode. The valid value of the parameter is displayed immediately. 2. Use the middle key (VALUE) to select the desired value from 1 to 8 3. To enter and save the value we want, press the lower ENTER key.
|
|
Procedure for setting the operating time of the auxiliary electric heating in case the main electric heating is switched off (in case the ambient temperature exceeds the set limits or precipitation stops).
|
1. Press the upper control knob (MENU) repeatedly to enter the POST PURGE time value. The valid time value is displayed immediately. 2. Use the middle key (VALUE) to select the desired value from 10 to 120 minutes 3. To enter and save the value we want, press the lower ENTER key.
|
Procedure for forced switching on of the electric heating system (in the absence of precipitation)
- Press the upper controller key (MENU) repeatedly to enter the heating operation selection mode (Operation). The AUTOMATIC value will be displayed in the automatic mode of the controller
- Use the middle key (VALUE) to select the PERMANENT permanent heating mode.
- To enter and save the value we need, press the lower ENTER key.
- After forced operation, the heating system must be returned to automatic mode
Setting the basic parameters of the Eberle EM 524 89 controller
|
How to set up the use of the regulator
|
1. Press the upper control knob (MENU) repeatedly to enter APPLICATION mode. The valid value of the parameter is displayed immediately 2. Use the middle key (VALUE) to select the required value for the roof (ROOF). 3. To enter and save the value we need, press the lower key ENTER
|
|
Procedure for setting the lower limit value of the electric heating trigger temperature
|
1. Press the upper control knob (MENU) several times to enter the mode for selecting the lower limit of the electric heating trigger temperature (RANGE). The valid temperature value is displayed immediately. 2. Use the middle key (VALUE) to select the desired value from -5 to -20 degrees. 3. To enter and save the value we need, press the lower key ENTER
|
|
Procedure for setting the value of the upper limit of the electric heating operating temperature
|
1. Press the upper control knob (MENU) several times to enter the mode for selecting the upper limit of the electric heating trigger temperature (TEMPERATURE). The valid temperature value is displayed immediately. 2. Use the middle key (VALUE) to select the desired value from 0 to +6 degrees. 3. Чтобы ввести и сохранить нужное нам значение, нажмите нижнюю клавишу ENTER.
|
|
Procedure for setting the humidity measurement of the precipitation sensor
|
1. Press the upper control knob (MENU) repeatedly to enter the MOISTURE selection mode. The valid value of the parameter is displayed immediately. 2. Use the middle key (VALUE) to select the desired value from 1 to 8 3. To enter and save the value we want, press the lower ENTER key.
|
|
Procedure for setting the operating time of the auxiliary electric heating in case the main electric heating is switched off (in case the ambient temperature exceeds the set limits or precipitation stops).
|
1. Press the upper control knob (MENU) repeatedly to enter the POST PURGE time value. The valid time value is displayed immediately. 2. Use the middle key (VALUE) to select the desired value from 10 to 120 minutes 3. To enter and save the value we want, press the lower ENTER key.
|
Procedure for forced switching on of the electric heating system (in the absence of precipitation)
- Press the upper controller key (MENU) repeatedly to enter the heating operation selection mode (Operation). The AUTOMATIC value will be displayed in the automatic mode of the controller
- Use the middle key (VALUE) to select the PERMANENT permanent heating mode.
- To enter and save the value we need, press the lower ENTER key.
- After forced operation, the heating system must be returned to automatic mode
