Flashing light 15 W/sec
Flashing light 15 W/sec
The 15 W/s flashing light informs, warns and alarms of malfunctions in machines and units in hazardous areas.
For early warning of a dangerous situation and rapid detection of damage, devices with optical signalling devices are used which immediately signalise the occurrence of a dangerous situation.
BARTEC signalling lamps are designed for continuous operation.
BARTEC signalling devices inform, warn, and alarm about malfunctions in machines and units in the hazardous areas of zones 1 and 2, zones 21 and 22.
The signal lamp consists of a small hermetically sealed aluminium housing for mounting electronic equipment and a glass hemisphere made of tempered borosilicate glass.
The connection space is designed according to the fire protection type “Increased safety” in accordance with EN 60079-7.
M20 x 1.5 threaded connection is used for cable entry.
Specifications:
|
Mark |
II 2G Ex d e IIC T5, T6 Gb |
|
Degree of protection |
IP 66/67 |
|
Calculated voltage |
AC 230 V |
|
Enclosure material |
powder-coated aluminium |
|
Flash energy |
15 W/s |
|
Flash frequency |
оk. 60 1/min (1 Hz) |
|
Temperature range |
Work: -55 °C ≤ Ta ≤ +40 °C (T6) (T80 °C) -55 °C ≤ Ta ≤ +55 °C (T5) (T95 °C) Storage: -60 °C to +80 °C |
|
Management |
The lamp is activated when nominal voltage supply |
Order codes:
|
Voltage |
DC 24 V |
АС 230 V |
|
Red colour |
07-4838-3184 | 07-4838-3114 |
|
Yellow colour |
07-4838-3183 | 07-4838-3113 |
|
Green colour |
07-4838-3185 | 07-4838-3115 |
